Drywall, Paint and Preservation and Suspended Ceilings Seabee BU A School Practice Exam

These questions are part of the practice quiz. Start practicing

• Which tool is used to smooth drywall edges after cutting?
• Chalk Line is primarily used to facilitate which drywall task?
• Which coating is commonly used for tile-like glaze coatings on concrete or masonry and structural steel?
• Which material comes as a powder and uses water for the desired consistency, and is used on concrete, masonry and stucco?
• Which insulation is manufactured in sheet or board form from wood, sugar cane, or other vegetable product?
• What corner bead size is used for 1/2 inch or 5/8 inch single layer drywall?
• What is the maximum ceiling spacing between nails?
• Which defect occurs without a specific reason, usually moisture in the wall or too many layers of old paint?
• How would you ensure color consistency when repainting patched drywall to match existing surfaces?
• Which tool is used to fasten corner bead, eliminating the need to nail or screw corner bead in place?
• Which fastener combination is described as Smooth Shank, Diamond-Head?
• What is orange peel texture, and how is it achieved?
• Which tool is used for cutting out irregular shapes and openings, such as outlet box openings?
• How should you document preservation decisions on a job?
• Which stain has an oil vehicle and mineral spirits can be added to increase penetration?
• Which option best describes the role of resilient channels?
• What is the recommended sequence for a standard drywall patch repair?
• Which finishing material is used to seal knots and prevent bleeding of subsequent coats?
• For 3/8 inch or 1/2 inch single-layer drywall, what size corner bead is used?
• Which hazard combination is commonly encountered remodeling older buildings?
• Name two hand tools used to apply joint compound.
• What is knockdown texture, and how is it formed?
• Which board is described as available in a variety of colors and is attached with drywall finish nails with edges left exposed without joint treatment?
• Sheets may be installed vertically and horizontally
• What is the concern with lead-based paint in preservation work?
• Painting over high gloss enamels or when paint is applied to masonry or concrete with silicone or water resist treatment leads to which issue?
• Why is it important to use reversible methods and compatible materials in preservation projects?
• What is the function of backer blocks in butt joints?
• What is the role of photos in preservation documentation?
• Acoustic tile characteristics include which of the following sets?
• Which tool eliminates the need for nailing or screwing corner bead in place by fastening it?
• What size corner bead is used for 3/8 inch or 1/2 inch drywall?
• Which of the following should be included when documenting preservation decisions?
• Combined resin and poly-amide hardener with limited working life; outstanding in hardness, adhesion, and flexibility; major use is tile-like glaze coatings for concrete or masonry, and structural steel?
• Used to attach two layers of drywall BUT not by the corners
• Which of the following is NOT a typical acoustic tile characteristic?
• What does reversibility mean in preservation practice?
• In ceiling nail placements, the center of nail pairs are about 12 inches apart, with each pair 2 to 2 1/2 inches apart. What is this arrangement called?
• Which surfaces are not painted unless damp proofing is required?
• Which thickness is used as a base layer in multi-layer drywall?
• Which two hand tools are used to apply joint compound?
• Self tapping and self drilling designed for use with metal studs
• What is lead-based paint and why is it a concern in preservation work?
• What causes nail pops and how can you prevent them?
• In a Level 4 drywall finish, how should the edges of mud be described?
• What is plaster consolidation, and when is it used?
• Where should nails be driven into drywall?
• Avoid joints within how many inches of the outside edge of doors and windows
• In repair and remodeling work over existing surfaces, what thickness is used as the face layer?
• For applying the final coat of joint compound over large areas, which tool is commonly used?
• Level 5 finish includes which additional step over Level 4?
• Which tool is primarily used to cut drywall by scoring and snapping along a straight line?
• Water based, excellent durability and useful for plaster and masonry surfaces?
• What defines a Level 5 drywall finish?
• Used to raise sheets short distances vertically
• Which board is moisture resistant and may be called green board?
• What is the described sequence for steps in painting?
• Which tool is used to apply paint when using an air or airless compressor or piston?
• What is the inside diameter range of the standard roller sleeve used for painting?
• What is the proper method for cutting openings for electrical outlets in drywall?
• What symptom indicates humidity was too high during drywall finishing, causing longer cure?
• What are the primary components of a suspended ceiling grid?
• In multi-layer drywall installations, base layer thickness is used?
• Which board functions as a vapor barrier on exterior walls and is available in several thicknesses?
• Used for carrying and lifting drywall sheets
• Which statement about drywall tools is true?
• What is the function of an access panel in a suspended ceiling?
• What is lime-based plaster used for in historic preservation?
• Which surface is difficult to prime properly and requires washing with solvent, etching with mild phosphoric acid wash and applying a specially formulated primer?
• In painting technique, what term describes the long vertical distance you move while applying paint?
• Which feature of drywall saves time in construction?
• Which tool flexes from 103 to 90 degrees and is used to apply joint compound in interior corners?
• Why would you install resilient channels in a wall assembly?
• Which coating is harder, tougher, and more resistant to abrasion and moisture penetration, available in flat, semigloss and gloss?
• What insulation type is supplied in bags or bales and composed of materials used in bulk form?
• Designed to be used as a base layer in multi-layer systems, with a grey paper lining on both sides and is not suited for finishing or decorating?
• What is the purpose of a dust control plan on drywall jobs?
• Which component is used as edge protection and trim around openings and as ceiling angle molding?
• Which paint finish is most washable and durable for kitchens and bathrooms?
• Which component holds the pigment together and adheres to surfaces?
• Which finish is widely used as a binder in varnishes, paints, and stains and is applied over knots to prevent bleeding?
• Which term refers to adhesive backed foam rubber, wood back foam rubber, rolled vinyl, and spring metal v-strip?
• Which tool is used to lay out and guide a 90 degree cut on drywall?
• What are the two main drywall tape options?
• After applying joint tape on drywall joints, what is the next step in finishing?
• Which coating is appropriate for drywall screws used in damp areas?
• Which insulation type is typically installed as blankets or batt forms?
• Minimum depth into metal studs for Type S screws
• Which material is commonly applied in thin beads to seal gaps around joints?
• Which backing board is used behind tiles in showers and other wet areas?
• Sheets may be installed how
• Which board is described as having a grey paper lining on both sides and is intended as a base layer in multi-layer drywall systems?
• Which insulation is designed to reduce radiant heat transfer?
• Which board is used as a vapor barrier on exterior walls and is available in various thicknesses?
• Which exterior masonry coating is suited for wet or humid environments and frequent washing?
• Before painting a ferrous metal surface, what should be removed to ensure proper adhesion?
• Which statement best reflects preservation ethics in Seabee work?
• What are the commonly used thicknesses of gypsum panels for single layer wall and ceiling application in residential and commercial construction?
• Which coating contains little pigment and yields a durable elastic high gloss film?
• Which product changes the color of wood and has four types: oil, water, spirit, and alcohol?
• What is the standard stud spacing in residential framing?
• In drywall patch repair, what is the purpose of installing backing behind the patch?
• What lengths are commonly used for drywall sheets?
• Which board is typically used as a sub layer with other drywall types and is often Type X and about 1/4 inch thick?
• Which practice best ensures consistent ceiling tile installation in terms of load and grid alignment?
• Which product is used to reduce drafts at openings such as doors and windows?
• A brush made of nylon is classified as which type?
• What practice helps prevent nail pops?
• Three guiding preservation ethics often cited in Seabee work?
• Which property of lime-based plaster makes it suitable for historic masonry?
• Which sequence describes patching a circular hole?
• What is the recommended screw spacing on sheet edges versus in the field?
• Harder, tougher, and more resistant to abrasion and moisture; outstanding hardness, adhesion, and flexibility?
• In preservation practice, original materials refer to what?
• Which defect occurs when gases escape through cracks causing moisture issues on damp surfaces?
• Which option is not a stain type described?
• Smooth shank nails should penetrate the thickness of the drywall plus how many inches into the underlying wood
• Which backing board is recommended behind tiles in wet areas?
• Why is humidity control important during drywall finishing and painting?
• Where should Type X drywall be used for maximum fire resistance?
• How can sagging of suspended ceiling tiles be prevented?
• Which corner bead size is 1 inch by 1 1/4 inch?
• Lacquer type product, called rubber based emulsions, dries rapidly, resistant to water and mild chemicals; used for exterior masonry that is wet, humid, or subject to frequent washing?
• How many inches do you nail on center through drywall into framing members?
• Take at least how many measurements to accurately locate the opening on the sheet
• What should a preservation change log contain?
• Used for feathering out the second layer of joint compound and is usually adequate for the third or topping layer
• Which stain is a solution of aniline dyes and water?
• What is the difference between setting-type joint compounds and premixed mud?
• What PPE is essential when working with lead paint?
• Which finishing material dries quickly and forms a hard surface, and can be clear or pigmented?
• What thickness is typical for standard interior drywall?
• Which sequence is described for preparing galvanized surfaces for painting?
• Which cleaning method is specified for removing oil, grease, dirt, and chemicals?
• What is the material that holds the pigment together and adheres to surfaces?
• Why is lime-based plaster favored for historic masonry over cement plaster?
• Which stain is a solution of aniline dyes and water?
• How should you evaluate paint color matching for repairs in preserved walls?
• For two layer drywall, which corner bead size is used?
• In preservation work, why is documentation important?
• How should you prepare a surface before applying joint compound?
• Which best defines a Level 4 drywall finish?
• Which stain works by means of chemical reaction when dissolved in water?
• Type X board true statement?
• Which tool is used for applying the third coat of joint compound?
• Where should a vapor barrier be placed in exterior walls?
• Which insulation is manufactured in blankets or batts?
• Core board and liner boards used for shafts, firewalls, and stairways are commonly how thick?
• Which step is completed last in the described painting steps?
• Which tool is used to hold and carry joint compound?
• Has a special moisture resistant core and paper cover that is chemically treated to repel moisture, may be referred as green board?
• Difference between patching and skim coating in drywall finishing?
• What thickness is commonly used for fire-rated drywall assemblies?
• What type of nail is most frequently used in drywall work?
• Which component is not part of a typical suspended ceiling grid?
• Which fastener type is designed for metal studs and has self tapping capability?
• How long should ceiling wires hang?
• Which statement best summarizes acoustic tile characteristics?
• Which bead is used as edge protecting and trim around windows and door openings and as moldings at ceiling angles?
• Which insulation material is manufactured from materials with high heat reflectivity such as aluminum foil, copper, or reflective oxide-coated paper?
• Which tool is used for feathering/smoothing dried joint compound?
• Caused by gases escaping through cracks or gaps, painting damp/dirty/hot surface or oil-based over latex moisture.
• What is the purpose of corner beads?
• Which item is made from various animal hair?
• For non-ferrous metals, what is the recommended pretreatment before applying primer?
• Which product is designed to reduce heat loss around windows and doors during cold weather and reduce heat transfer in hot weather?
• How do setting-type joint compounds differ from premixed mud in their curing process?
• When patching a circular hole, what is the recommended method?
• Type S screws should pass at least what into metal studs
• Too many coats, as paint hardens it gets brittle and loses stability. Which defect results?
• What are common hazards encountered when remodeling older buildings?
• Which step begins the standard painting sequence?
• Which finish is clear or pigmented, lusterless to semigloss/glossy, and dries quickly?
• Drywall's fire resistance is achieved primarily through which factor?
• What suspended ceiling tile sizes are most common?
• Which tool is primarily used to apply and finish joint compound?
• Sharp points designed for use with wood studs
• Which coating is known for having a consistent gloss and elastic properties and contains little pigment?
• Which tool is used to score and cut drywall?
• The handle, rotatable cage and sleeve/cover are components of which part of a paint roller?
• Which safety considerations apply to suspended ceilings work?
• Wall angles are fastened into framing members wherever possible not more than how far apart?
• Clear varnish mixed with aluminum flakes and available in mixed and ready to mix?
• What factors influence the choice of texture in historic spaces?
• Latex Paint is water based and useful for plaster and masonry surfaces?
• Which term describes solid particles suspended in paint that add color and durability?
• Crown headed to imprint nail and form a dimple without tearing the paper
• Which metal category requires cleaning with solvent and applying a primer coat or pre-treatment?
• Type X gypsum board is used to increase what in walls and ceilings?
• Which coating is a clear varnish mixed with aluminum flakes and available in mixed and ready to mix?
• What is the maximum wall spacing between nails?
• Which board is used as plaster base, replacing wood or metal lath in new construction and renovation, available in 16" and 24" widths and usually 48" long, not compatible with Portland cement?
• Which board is used for interior walls and ceilings and features a tapered edge for joint concealment?
• Used for single and multi-layer application; applied to interior walls and ceilings; tapered edge for effective joint concealment?
• Which statement about gypsum panel thickness is true?
• Which insulation is manufactured in sheet or board form for use on exterior walls?
• Which component is used to adjust the paint’s consistency and is commonly a solvent such as Naphtha or mineral spirits?
• Drywall sheets are most commonly used in what widths?
• What is a vapor barrier, and where is it typically installed?
• What is the cleaning process that uses a high velocity abrasive stream called?
• Which tool is used to feather or smooth joint compound on the surface to blend joints with the wall?
• Which defect occurs when painting over surfaces treated with silicone or water-repellent materials, leading to poor adhesion?
• Which tool is primarily used to hold and carry joint compound during application?
• In preservation practice, what does compatibility mean?
• What type of fasteners are used for wood studs, and what coating is important in damp areas?
• Which tool is used to facilitate layout in drywall installation?
• What composite material is used to seal joints, cracks, and small openings?
• What is the term for cleaning surfaces by blasting with abrasive particles at high velocity?
• Which knife size is typically adequate for the third or topping layer of joint compound?
• In painting technique, what term describes the short horizontal distance you keep while applying paint?
• Which tool is used to apply compound 3 to 4 inches wide from the nose of the corner bead?
• In which locations should moisture-resistant green board be used?
• A 12-foot length is equivalent to how many inches?
• Main tees come in which primary length?
• Which tool is used to bed tape in the first layer of joint compound and fill nail or screw dimples?
• Which defect is peeling, occurring when paint does not adhere well after application?
• Old oil-based paint beyond usable life indicates which problem?
• What is the purpose of primer on new drywall?
• What tool is used to apply and finish joint compound?
• Which stain contains alcohol?
• What is the difference between latex paint and oil-based enamel on drywall?
• Which board is used as plaster base, replacing wood or metal lath and is available in 16" and 24" widths?
• Which of the following is a type of weather stripping?
• Which paint type is made of drying oil, usually linseed, mixed with pigments, and is not recommended for surfaces submerged in water?